# What Is The Difference Between Chain Dimensioning And Datum Dimensioning?

## What is direct dimensioning?

Base line dimensioning is the easiest to follow when machining a part, but you must know the allowable variation between points of interest.

.

.

Direct dimensioning.

This allows the least variation in the distance from A to B, giving a total tolerance accumulation of .005” and a maximum distance AB of 3.505”.

## What is length width and height?

You can use length, width, and height. Length: how long or short it is. Height: how tall or short it is. Width: how wide or narrow it is.

## What are the principles of dimensioning?

Three principles of dimensioning must be followed:Do not leave any size, shape, or material in doubt.To avoid confusion and the possibility of error, no dimension should be repeated twice on any sketch or drawing.Dimensions and notations must be placed on the sketch where they can be clearly and easily read.

## Which is length and width?

Length is describing how long something is while width is describing how wide an object is. 2.In geometry, length pertains to the longest side of the rectangle while width is the shorter side. 3. Length can also refer to an extent of time or a measure of distance.

## What are dimensioning tools?

The Dimensioning tab contains tools that are useful for creating objects which must fit predefined dimensions or for dimensioning objects you have created. These tools can also be accessed via the Tools > Dimensioning menu. They can be used to dimension a line, edge, bounding box, angle, and radius/diameter.

## What are the different types of dimensioning?

The basic types of dimensioning are linear, radial, angular, ordinate, and arc length. Use the DIM command to create dimensions automatically according to the object type that you want to dimension.

## What is baseline dimensioning?

A baseline dimension is a group design object. It allows for the dimensioning of a linear distance of a collection of references, relative to a single base reference. The first point chosen is the ‘base’. All subsequent points are relative to this first point.

## How do you calculate overall dimension?

Measure any two sides (length, width or height) of an object or surface in order to get a two-dimensional measurement. For example, a rectangle that has a width of 3 feet and height of 4 feet is a two-dimensional measurement. The dimensions of the rectangle would then be stated as 3 ft. (width) x 4 ft.

## What is datum dimensioning?

A datum dimension is a group design object. It allows for the dimensioning of a linear distance of a collection of objects, relative to a single reference object. The first object chosen is the ‘base’.

## What dimension means?

A measurement of length in one direction. Examples: width, depth and height are dimensions. … a square has two dimensions (2D), and a cube has three dimensions (3D). In Physics it can also mean any physical measurement such as length, time, mass, etc.

## What are dimensions of order?

Usually the bigger dimension goes first, if it’s a car is the length, a TV screen the width, a door the height. But it’s not a rule. Some class of object follows the same order like furniture, a table has a long length and width, and small height so the height is last.

## Is size a dimension?

When used as nouns, dimension means a single aspect of a given thing, whereas size means an assize. When used as verbs, dimension means to mark, cut or shape something to specified dimensions, whereas size means to adjust the size of.

## What are the two system of dimensioning?

Explanation: The two systems of placing dimensions are aligned system and unidirectional system. In the aligned system, the dimension is placed perpendicular to the dimension line. In the unidirectional system, all dimensions are placed such that they can be read from the bottom of the drawing sheet.

## What is the difference between size and location dimensions?

Size dimensions describe the size of each geometric feature. … Location dimensions show the location of each geometric feature within an object or view. Location dimensions tell the viewer where edges occur inside an object view.

## What is a chain dimension?

Chain dimensions are reference dimensions driven by the geometry. You cannot change their values or use the values to drive the model. When you create chain dimensions, your first selection defines the starting edge of the chain. Subsequent selections are measured from one selection to the next.

## What are the general rules of dimensioning?

Overall dimensions should be placed the greatest distance away from the object so that intermediate dimensions can nest closer to the object to avoid crossing extension lines. 9. A dimension should be attached to only one view (i.e., extension lines should not connect two views).

## What goes first length or width?

The Graphics’ industry standard is width by height (width x height). Meaning that when you write your measurements, you write them from your point of view, beginning with the width. That’s important. When you give us instructions to create an 8×4 foot banner, we’ll design a banner for you that is wide, not tall.

## What is the LxWxH?

Length x Width x Height. (LxWxH) where the height is the vertical dimension of the box when the opening is facing upwards. (for easy reference, you can open this page in another browser window)